|
|
|
|
|
|
|
|
|
|
|
|
|
|
McGaughy's 1963-1987 C-10 Chevy Truck CNC Laser Cut & Formed Boxed Upper Control Arms w/ Stainless Steel Badges, Poly Bushings & Sleeves (63131)
This kit comes with everything you need to go with the McGaughy's 1963-1987 C-10 Chevy Truck 2" Front Drop Crossmember Kit (63115). What this is going to do is upgrade your upper control arms to boxed system for increased handling and better suspension feel. This is a 1" narrowed boxed upper control arm set with poly bushings, sleeves & stainless steel badges (Comes Raw). This is as good as it gets to make that truck ride like a dream on the road. It will ride and feel like a brand new pick up with all this modern technology underneath you will forget you are driving something that was originally built over 30 years ago.
McGaughy's Lifetime Warranty
|
10 or 12 bolt GM CAR Rear-end 13" Rotor Kit 5 on 4.75" (must use 17"+ rims)
|
10 or 12 bolt GM CAR Rear-end 13" Rotor Kit 5 on 5" (must use 17"+ rims)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
12 Bolt GM TRUCK Rear-end, 13" Rear Disc Brake Kit (must use 17"+ rims) 5 x 4.75
|
12 Bolt GM TRUCK Rear-end, 13" Rear Disc Brake Kit (must use 17"+ rims) 5 x 5
|
12 Bolt GM TRUCK Rear-end, 13" Rear Disc Brake Kit (must use 17"+ rims) 6 LUG
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
10 or 12 bolt GM CAR Rear-end 13" Rotor Kit 5 on 4.75" **cross drilled rotors** (must use 17"+ rims)
|
10 or 12 bolt GM CAR Rear-end 13" Rotor Kit 5 on 5" **cross drilled rotors** (must use 17"+ rims)
|
12 Bolt GM TRUCK Rear-end, 13" Rear Disc Brake Kit (must use 17"+ rims) 5 x 4.75 **cross drilled rotors**
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
12 Bolt GM TRUCK Rear-end, 13" Rear Disc Brake Kit (must use 17"+ rims) 5 x 5, **cross-drilled rotors**
|
12 Bolt GM TRUCK Rear-end, 13" Rear Disc Brake Kit (must use 17"+ rims) 6 LUG, **cross drilled rotors**
|
1963-70 C-10,13" Front Disc Kit w/2.5" Spindles (5 on 4.75")(must use 17"+ rims)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1963-70 C-10,13" Front Disc Kit w/2.5" Spindles (5 on 5") (must use 17"+ rims)
|
1971-72 C-10,13" Front Disc Kit w/2.5" Spindles (5 on 4.75") (must use 17"+ rims)
|
1971-72 C-10,13" Front Disc Kit w/2.5" Spindles (5 on 5") (must use 17"+ rims)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1963-70 C-10, 13" Front Disc Kit w/ 2.5" Drop Spindles (6 LUG) must use 17"+ rims
|
1971-72 C-10, 13" Front Disc Kit w/ 2.5" Drop Spindles (6 LUG) must use 17"+ rims
|
1963-70 C-10,13" Front Disc Kit w/2.5" Spindles**cross drilled** (5 on 5") (must use 17"+ rims)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1963-70 C-10,13" Front Disc Kit w/2.5" Spindles **cross drilled** (5 on 4.75") (must use 17"+ rims)
|
1971-72 C-10,13" Front Disc Kit w/2.5" Spindles **cross drilled** (5 on 4.75") (must use 17"+ rims)
|
1971-72 C-10,13" Front Disc Kit w/2.5" Spindles**cross drilled** (5 on 5") (must use 17"+ rims)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1963-70 C-10, 13" Front Disc Kit w/ 2.5" Drop Spindles (6 LUG) must use 17"+ rims **cross-drilled**
|
1971-72 C-10, 13" Front Disc Kit w/ 2.5" Drop Spindles (6 LUG) must use 17"+ rims **cross drilled**
|
McGaughy's 1963-1972 C-10 Chevy Truck 2" Front Drop Crossmember Kit (63115)
This kit comes with everything you need to lower the front of your Chevy C-10 pick up. This is a 2" Drop Front Crossmember Kit w/ Upper & Lower A-Arms, Motor Mount Brackets, Upper A-Arm Mounts, Lower Coil-Over Mounts, Inner Frame Supports, & Heim Joint Steering Adapters. All of the necessary bolts and screws etc. are included with this kit for installation. This kit is built by McGaughy's and the strongest, easiest to install all bolt on ready, minor trimming of frame required to clear the steering shaft and no welding needed. If you are looking for the easiest to install, most cost effective and reliable kit for your chevy c-10 pick up then you found it. Here at Suspension online we support everything we sell and are experienced in many installations as well. Not sure about something then call us and we will be happy to assist. McGaughy's Lifetime Warranty
|
|
|
